Tech-source Raptor X11R6.1 for AIX Manual de usuario descargar pdf (Pagina 21)

Chapter 4 - Invoking X11R6.1

4-5

Other bit-depths can be selected in a similar manner.

NOTE: In the case when both methods to set bit-depth are used,

the STARSMODE variable takes precedence over the settings in the

TSIScreenConfig file.

4.3.1.2.2 Config File

The depth and resolution of the Raptor T-Class card can be set

using the /usr/X11R6.1/etc/TSIScreenConfig file. Each

row in the file corresponds to a specific Raptor T-Class card that is

identified by its device name. The fields in each row are separated

by spaces. In the sample config file shown below the bit-depth of

the Raptor 1100T (rap1kt0) card is set to 8+24. The cached

pixmap field is used for debugging purposes only and should

always be set to 1. The other fields are discussed in 4.3.2.

# device Depth Resolution Sync Cached Resfile

pixmap

rap1kt0 8+24 DEFAULT 1 1 trzresinfo

The default visual in 8+24-bit mode is PseudoColor. In order to set

the default visual in the 8+24-bit mode to TrueColor, the X Server

should be started with command line option cc set to 4. The

example below shows how to set the default visual to TrueColor for

the card rap2kt0.

#xinit -- $X11R6HOME/bin/Xtsi –Pll rap2kt0 –cc 4

NOTE: This method of setting the default visual has an effect only

in the 8+24-bit mode.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 39 40

Sin comentarios

Tech-source Raptor X11R6.1 for AIX Manual de usuario Pagina 21