Tech-source Raptor 4000 Series (for Linux) Manual de usuario descargar pdf (Pagina 20)

Raptor 4000 Series: Reference Manual

SubSection "Display"

Depth 16

Modes "2048x2048"

EndSubSection

SubSection "Display"

Depth 24

Modes "2048x2048"

EndSubSection

EndSection

# TSI Raptor 4000 Configuration Sections

3.8.1 Monitor Section

This section contains default configuration information for the

monitor and should remain unchanged.

3.8.2 Device Section

Identifier: Each instance of a Raptor card should have a

unique identifier. This identifier is used in the

Screen section.

NOTE: The BusID value in the configuration file will be updated

automatically during software installation. The BusID will need to

be updated manually for additional Raptor Series cards or slot

changes. Please see the description below for details.

BusID: Depending on the machine and the slot the

card is in, it might receive a unique BusID.

When the driver attaches, it will print out the

device name and BusID. To check the

BusID, type dmesg|grep rapafp. The

output should look similar to the following:

TSI: rapafp0 (BusID 41:0:0) is

RAPTOR 4000 @ 1280x1024

TSI: rapafp1 (BusID 41:0:0) is

RAPTOR 4000 @ 2048x2048.

In the example above, the Raptor 4000 has a

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 63 64

Sin comentarios

Tech-source Raptor 4000 Series (for Linux) Manual de usuario Pagina 20