Tech-source Raptor 4000 Series (for Linux) Manual de usuario descargar pdf (Pagina 42)

Raptor 4000 Series: Reference Manual

4.8 Rotation Mode Configuration

An option for screen rotation is available for the Raptor 4000R

board. Only the first head, the one closest to the PCI bus, will

support video for the rotator board.

To set the card in rotation mode, the "Rotation" option must

be uncommented in the “Device” Section in the xorg.conf

file. This option must be set prior to starting the Xserver. If this

option is commented out, then X Windows will be displayed in

regular, non rotated mode.

There are two rotation modes, clockwise and counterclockwise.

To start X Windows in clockwise rotated mode, set the

"Rotation" option to “+r” prior to starting the X server.

Observe the example below:

Section "Device"

Identifier "Rapafp0"

Driver "rapafp"

BusID "PCI:5:9:0"

Card "TSI Raptor 4000"

Option "Device" "/dev/rapafp0"

Option "Mode" "mox24"

Option "ScaleCursPos" "on"

Screen 0

Option "Head" "0"

# Option "DDCCheck" "off"

Option "Rotation" "+r"

# Option "Sync" "sx"

# Option "BackingStore"

# Option "SaveUnder"

# Option "TranspColor" "0x0a3246"

EndSection

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 63 64

Sin comentarios

Tech-source Raptor 4000 Series (for Linux) Manual de usuario Pagina 42