Tech-source Raptor DL-Lite Drivers for AIX Manual de usuario descargar pdf (Pagina 17)

Chapter 4 - Invoking X11R6.1

4-3

4.3 Setting Bit-Depth and Resolution

4.3.1 Setting Bit-Depth

Raptor cards support various bit-depths and overlay configurations.

This section describes the required settings for these

configurations. The default bit-depth for all Raptor cards is 8-bit.

The bit-depth of the Raptor DL-Lite can be set to 8-bit only, 8+24-

bit, 24-bit, mox16, mox24 or mox32 (see Table 2.)

Mode/Bit-Depth Description of Mode

8-bit 8-bit PseudoColor visual

8+24 mode One 8-bit visual + One 24-bit visual

(simultaneous)

24-bit 24-bit TrueColor visual only

mox16 mox mode w/16 planes

mox24 mox mode w/24 planes

mox32 mox mode w/32 planes

Table 2

An explanation of different MOX modes can be found in Section

4.4.

There are two ways to set bit-depth on the Raptor DL-Lite:

• By setting the environment variable

STARSMODE

• By editing the config file /etc/X11/TSIScreenConfig

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Sin comentarios

Tech-source Raptor DL-Lite Drivers for AIX Manual de usuario Pagina 17