Tech-source Raptor DL-Lite Drivers for AIX Manual de usuario descargar pdf (Pagina 20)

Raptor DL-Lite X11R6.1 for AIX Installation Manual

4-6

directory $X11R6HOME/lib/X11/xdm. The configuration file

xdm-config contains references to the other files and is used to

specify other configuration parameters of xdm. The Xservers file

specifies the users (displays) that must get a login window.

The Xservers file will have individual lines to represent the X-

server startup on each of the display device on which an xdm login

screen is desired. Each startup line in Xservers file should be

modified to look like the following to enable the Raptor device

based xdm login screen:

:0 Local local-uid@console root \

/usr/X11R6.1/bin/Xtsi :0 –P11 rapdlt0

You may also add any other command line arguments to the end of

the line. For more information on xdm refer to the xdm man pages.

4.5.1 MOX Mode Using xdm

In order to enable MOX under xdm you must make use of the

StartWin script installed in /usr/X11R6.1/etc. The

Xservers file should be modified as follows:

:0 local /usr/X11R6.1/bin/StartWin:0

Additional command line options can be appended at the end of

this line. The following example StartWin script will start up the

X Server in mox24 mode.

#!/bin/sh

STARSMODE=+mox24

export STARSMODE

pass=“/usr/X11R6.1/bin/Xtsi”$*

exec $pass

NOTE: By default, the StartWin script starts up the X Server in

mox24 mode. It can be edited in order to support other MOX

modes.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 31 32

Sin comentarios

Tech-source Raptor DL-Lite Drivers for AIX Manual de usuario Pagina 20