Tech-source Raptor Drivers for Linux Manual de usuario descargar pdf (Pagina 26)

Raptor Drivers for Linux Installation and Reference Manual

4-4

8. To install the MOX package, type:

prompt# cd /mnt/cdrom/linux/moxlib

prompt# rpm -Uvh tsimox-*.rpm

NOTE: You must install the MOX package if you plan on running

the cards in MOX mode. The MOX package is common to both

I-Class and T-Class cards.

4.4 New Device

One new device name is created in the /dev directory for each

Raptor card. It is denoted by rap2kt# for the Raptor 2100T,

raptfp# for the Raptor 2500T and rapifp# for Raptor 3840T

and rap1kt# for the Raptor 1100T where # represents an

instance number assigned by the operating system. For

example, /dev/rap2kt0 is the first Raptor 2100T card seen by

the system. /dev/rap2kt1 will be the second Raptor 2100T

card seen by the system and so on.

4.5 Changing Resolution

The resolutions for Raptor 2100T and Raptor 2500T are fixed.

They are shown in the table below. The resolution of the 1100T

and Raptor 3840T can be changed by changing the value of the

Modes field in the Screen section of XF86Config. See Section

5.7 for more information.

Graphics Card Resolution Monitor Supported Interface

Raptor 2100T 2048x2048 Sony DDM 2800 Analog

2560x2048 TSI 2500 FPS Raptor 2500T

2048x2048 TSI 2100 FPS

Digital

Raptor 1100T Up to

1920x1200

Various Analog

Raptor 3840T Up to

3840x2400

9.2 Mega Pixel

Color Display

Digital

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 63 64

Sin comentarios

Tech-source Raptor Drivers for Linux Manual de usuario Pagina 26