Tech-source Raptor Drivers for Linux Manual de usuario descargar pdf (Pagina 39)

Chapter 5 – Invoking The X Server

5-7

5.6.2 Setting Bit-Depth on T-Class Cards

The T-Class cards support the 8-bit, 24-bit, 8+24-bit, 8+8,

mox16, mox24 and mox32 modes. Radar Scan capable

versions of T-Class cards additionally support mox16radar,

mox24radar and 8radar. By default these cards start up in 8-bit

mode.

These modes can be selected by modifying the Device section

and Screen section of the XF86Config file appropriately.

To set bit-depth to 8-bit, the "Mode" option in the Device

section needs to be set to 8 and the other values should remain

unchanged.

To set bit-depth to 24, the "Mode" option needs to be set to

"24" as shown:

Section "Device"

Identifier "Raptor1.1KT"

Driver "rapt"

Card "TSI Raptor 1100T"

BusID "PCI:0:12:0"

Option "Device" "/dev/rap1kt0"

Option "Mode" "24"

Option "ScaleCursPos" "on"

EndSection

To select 8+24-bit mode, the "Mode" option should be set to

8+24 as shown in the following example. In this case the default

visual is 8-bit PsuedoColor.

Section "Device"

Identifier "Raptor1.1KT"

Driver "rapt"

Card "TSI Raptor 1100T"

BusID "PCI:0:12:0"

Option "Device" "/dev/rap1kt0"

Option "Mode" "8+24"

Option "ScaleCursPos" "on"

EndSection

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 63 64

Sin comentarios

Tech-source Raptor Drivers for Linux Manual de usuario Pagina 39